Description
Description: Manually or mechanically controlled hydraulic directional control valve is designed for distribution and control of working fluid between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with single plunger with common check valve and with safety valve.
Construction: Valve is made out of a single block (monoblock). Its body is made of cast iron EN-GJL-300. Plunger is made of carbonized steel with hard chrome plating.
Features:
Type of hydraulic valve: Hydraulic monoblock directional control valve
Type of control: Hydraulic Hand Valve
Nominal flow: 40 l/min
Number of sections: 1
Number of handles: 1
Safety valve: Included
Mounting: 2 diagonal holes for M8 bolts
Ambient temperature: -40 °C…+60 °C
Fluid medium: Mineral oil based hydraulic oil
Viscosity:
- 12…800 mm²/s permissible range
- 20…100 mm²/s recommended range
Fluid temperature: -15 °C…+80 °C
Filtration: class 10 according NAS 1638
Max operating pressure:
- P = 250 bar
- T = 50 bar
- A,B =Â 300 bar
Internal leakage: 7 cm³/min at 100 bar
Spool stroke: 6 mm
Actuating force: < 200 N in spool axis direction
Simplified diagram of valve and handle operation (3 positions):
Additional information
| Nominal flow | 40 l/min |
|---|
