Hydraulic gear pump group 1 European flange 3,15 ccm

Description

Description: Hydraulic pumps produce pressure in hydraulic system, which enables movement of hydraulic actuators (including cylinders). Gear pumps are one type of hydraulic pumps which are made out of 2 gears which generate the hydraulic pressure on output port. Hydraulic gear pumps are usually connected to electric motors with a shaft which turns the gears inside the pump. Each gear pump has a fixed amount of fluid which it can move from input port to output port in one revolution. This quantity of fluid is called displacement of gear pump.

Usage: Hydraulic gear pumps are used in agricultural machinery (like tractors) , industrial machinery, lifting equipment (like forklifts) and other heavy machinery which uses hydraulic systems to move, crush or lift objects.

Features:

Designated group: Gear pump group 1

Rated pressure: 250 bar

Maximum pressure: 280 bar

Minimum speed: 700 revolution/min

Maximum speed: 3500 revolution/min

Taper of driving shaft: 1:8

Location of driving shaft: through the front cover

Required oil viscosity:

• 6 mm²/s … 200 mm²/s permissible range
• 20 mm²/s … 60 mm²/s recommended range

Required degree of filtration: 25 µm

Operating temperature of hydraulic oil:

• -25 °C … 80 °C permissible range
• 30 °C … 50 °C recommended range

Inlet pressure: 0,8 bar … 2,2 bar

Recommended oil speed at inlet: 0,3 m/s … 1,3 m/s
Recommended oil speed at outlet: 2 m/s … 5,5 m/s

Connection of inlet port and outlet port: hole diameter 12 mm and 4 fixing holes sizes M2

Dimensions of gear pump variant clockwise rotation with European flange type 1:

Dimensions of gear pump variant anticlockwise rotation with European flange type 1:

European flange type 1 dimensions:

Shaft type 1 dimensions:

Connection of inlet port: 

Connection of outlet port: 

Additional information